Please help me to install oracle RAC 11gr2
Just click on the right for your comprehensive FREE training program to kick start your Oracle Database Development journey! The prior article in this series. Oracle Database 11gR2 - Installation on Linux OEL 5 Update. ALTER SYSTEM SET control_management_pack_access='NONE' SCOPE=MEMORY; and Apply patch the patch 8730312 2. Error: Checkpoint not complete in alert log file Oracle 11gR2 Reason: your online redo logs are defined too small to handle the load and you have filled and need to switch to a new online redo log before the checkpoint triggered by the previous log switch has been completed. Testimonials – KDJ GENERAL SERVICES LLC. New York, NY 2 months ago Be among the first 25 applicants.
- Amazon.co.uk: Customer reviews: Oracle Database 11gR2
- Oracle Database 11g + Drupal 7 Installation Routine
- Oracle 11gR2 I/O Performance Tuning: Implementing I/O
- Managing Optimizer Statistics - 11g Release 2 (11.2)
- Open Security Research: Top 10 Oracle Steps to a Secure
- Oci_connect() fails sometimes
- [eBooks] Oracle 11gr2 Two Node Step By Step Installation
- Database Upgrade to 11gR2
- SYS_REFCURSOR and FETCH with multi-table cursor
- Oracle11gr2 - Character set in Oracle 11g r2 XE
- How to deploy Oracle 11gR2 on RHEL6/Oracle Linux 6
- Oracle 12c – Duh! Microsoft did it again
- Oracle User Group Scotland Conference 2020 – Andrew Fraser DBA
- Listener.ora and service registration in 11g
- Me and My Ubuntu: Installing Oracle 11g R2 Express Edition
- Oracle 11g setup closes without errors on pre-requisite
- Oracle Adf 11gr2 Development Beginners Guide
- Ask TOM "11g SQL Result Cache vs times Ten"
- Oracle in World: Step by Step Oracle 11gR2 RAC
- Install Oracle Software in silent mode 11gR2 (220.127.116.11
- Amazon.com: Customer reviews: Oracle ADF 11gR2 Development
- Oracle Real Application Clusters Administration And
- Join (or equivalent) a collection to a table. - Ask TOM
- Error while installing SMD agent / DeskDr.com
|1||11gR2 Listener With RATE_LIMIT Set: Slow Connect ...||62%|
|2||Find the user failed login attempts in Oracle database 11gR2||75%|
|3||Oracle 11gR2 ORA-12005 may not schedule automatic refresh||24%|
|4||Pre-requistes for 11gr2 RAC installation||86%|
|5||Oracle 11gR2 software and database installation on CentOS||41%|
|6||Install Oracle 11G Release 2 (11.2) on Oracle Linux 7||42%|
|7||Oracle 11gR2/ASM on Windows Server 2020||65%|
Auditing Oracle Database
Oracle 11gr2 Patching; Breadcrumb. Characterset WE8MSWIN1252 Hi Tom, We are currently using characterset WE8MSWIN1252 for our database which contains Arabic characters. This article presents how to install Oracle 11G on Oracle Enterprise Linux 7 (OEL7). Oracle 11gr2 patch set times. Bosom friend This is Leo from Hong Kong, we are maker focusing on 7 in 1 Thunderbolt 3 USB3.1 Kind C to HUB Adapter only. In an Oracle Real Application Clusters (Oracle RAC) environment, if an export operation has PARALLEL=1, then all Data Pump processes reside on the instance where the job is started.
Patch auditing on Oracle Database in a Nutshell (11gR2)
Read PDF Oracle Adf 11gr2 Development Beginners Guide oracle adf 11gr2 development beginners guide is available in our book collection an online access to it is set as public so you can get it instantly. Reviewing makes you much better. Acces PDF Oracle Adf 11gr2 Development Beginner S Guide Oracle Adf 11gr2 Development Beginner S Guide Thank you for downloading oracle adf 11gr2 development beginner s guide. NTP configuration issues with Oracle 11gR2 RAC setup. Log in; Register; Go Directly To Home; News; People; Search; Search Cancel. We have a four nodes cluster.
Activity code oRACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle
Oracle Data Guard 11gR2 Administration Beginner's Guide, By Emre Baransel, Nassyam Basha. Oracle 11gr2 Two Node Step By Step Installation Guide On is available in our book collection an online access to it is set as public so you can download it instantly. Log fles for Oracle clusterware which contains diagnostic messages at the Oracle cluster level. Build Your Own Oracle RAC 11g Cluster on Oracle Enterprise. Oracle 11gR2 can I delete datafiles to reduce tablespace? However, the value of DB_8K_CACHE_SIZE remains fixed at all times at 128M.
Key database administrator workshop: How to perform a SCN
Oracle Statspack Survival Guide. Oracle RAC 11gR2 at IBM Training. Maybe you have knowledge that, people have search numerous times for their favorite readings like this oracle real application clusters administration and deployment guide 11gr2, but end up in malicious downloads. Each time you plan to patch your oracle 11g and 12c databases, go through this course and checklists to optimize your patching strategy. This guide also provides a basic tutorial for TimesTen. The result is 14 for all databases Note: Every database in or home needs to be checked, if one or more has a result higher than 14 you need to follow steps.
Keygen database Block Size Smaller Than ...
In this course you will learn. For RAM Between 2 GB and 16 GB, Swap= Equal to the size of RAM. Contains examples of how to use the Oracle Database. I am using 11gR2 on windows server. Build 078 Linux, x64, 64bit (optimized), Oracle 10 on Jul 28 2020 13: 21: 11. Oracle database 11gR2 installation in RedHat 6.2 (32-bit.
Recursion - Oracle 11GR2 TKPROF - How to capture the
The LPAR has 44 Gb of available memory and 8 dual-core processors assigned.
10g (10.2.0.1) to 11gR2 (18.104.22.168) Migration [Windows OS]
First: I've posted/talked about this mess before, but I just want to put this out there: I inherited the mess you're about to read about. These are NOT my design decisions, nor should they have ever been done in the first place. I have been tasked with cleaning up this mess, and that's why I'm seeking help here and elsewhere.
With that out of the way, let me introduce you to the players in question:
- Oracle 10g (10.2.0.1) Itanium 32-bit
- Windows Server 2003 SP2 Enterprise Ed. IA64-bit (Intel Xeon EM64T to be precise)
- 16 GB RAM - Oracle is configured in AWE to allow extended RAM usage beyond 2 GB per 32-bit thread limit.
- 820 GB of storage in RAID 0 (...) shared between two logical volumes (E & F).
- 1 HDD in the RAID array has a bad sector or block, causing 1 (only 1) bad block in Oracle on one object (an un-used MV)
- Oracle is configured for NOARCHIVELOG mode (not enough disk space)
- Oracle 11gR2 (22.214.171.124) 64-bit
- Windows Server 2008 R2 Enterprise Ed. 64-bit
- 36 GB RAM
- 1.2 TB of storage in RAID 5 - one logical volume
- 2.0 TB of storage in NetApp LUN for Archive Logs
I've considered and attempted several different migration strategies, and have come close - but not quite there on most of them, and so I'm seeking the help of the Reddit community in hopes that someone can offer advice or suggestions. Our current options are down to:
- Use RMAN to back up the 10g database and restore to 11g.
- Implement Oracle GoldenGate on the 10g database and replicate to the 11g database.
- To restore 10g RMAN to 11g requires that a timezone upgrade file from 11g be applied to 10g (How To Restore 10g RMAN Backup to 11g?) - but I'm not clear as to what, if any, negative impacts this will have to any continuing operations on the 10g database until the migration can be completed.
- The RMAN backup currently fails because it encounters one (1) bad block on one (1) object in the database - an un-used Materialized View. It is my understanding that if I were to drop this object, RMAN should then be able to complete the backup without encountering an error - but I haven't been able to confirm this.
- Because we are unable to put the database in ARCHIVELOG mode, all RMAN backups have to be taken with the database cold, and the files are written to a share on the network, not locally. Currently the back up for the database (~769 GB) takes approximately eight (8) hours to complete, which severely impacts our daily ETL processes. Oracle will not write archive logs to an NFS location, and our IT group has not been able to find an iSCSI initiator that works correctly with the current OS, so writing to a SAN is currently out and so are hot backups with RMAN.
- Once configured, initial replication of all data currently in the old data warehouse (P1) will be handled by GG.
- GG will then replicate all data changes to the new data warehouse as they occur in the old data warehouse, allowing us to keep both warehouses in sync.
- On the day of migration, the GG replication from the old data warehouse will be discontinued and the new ETL processes on the new data warehouse will be turned up.
- Implementing GG is not for the faint of heart - I've figured out that much.
- Not clear if GG requires Archive Logs, or can be set to just use the REDO logs.
- Not clear if GG Extract can write the required logs and files to a remote file share or if it must be local, and then moved.
- Because of the difference in version of both Oracle and host OS, I'm not sure if this is even possible.
- Implementing GG will require changes to our current ETL process - currently most daily tables and dropped and re-created (not my implementation!) and are setup with NOLOGGING - to my knowledge this would prevent GG from capturing those events and replicating them.
[Oracle 11gR2] LRM-00109 & ORA-01078 when using pfile generated from spfile.
OS: Windows Server 2008 R2 64-bit
DB: Oracle 11g 64-bit Enterprise Edition
Yesterday evening we had to restart the host OS in order to finalize the installation of a Windows component. Upon rebooting, I noticed that the while the Oracle Listener had restarted, the DB instance had not - which was unusual, as it was set to automatic and there's only one instance.
So, figuring that something must have interfered with the startup, I went and:
C:\Users\sqldiaries>sqlplus / as sysdba SQL*Plus: Release 126.96.36.199.0 Production on Wed Oct 16 12:14:29 2013 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to an idle instance. SQL> startup ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated ORA-01263: Name given for file destination directory is invalid OSD-04018: Unable to access the specified directory or device. O/S-Error: (OS 2) The system cannot find the file specified. SQL>And immediately alarm bells began ringing, because db_recovery_file_dest is configured to point to a SAN mounted as an iSCSI drive on F:. So I hop into Windows Explorer, figuring that I'm going to find the drive missing - it's not, however all is not right. F:\ is now showing a completely different set of files - files that were supposed to be deleted in a format before we began using it for FlashRecovery - instead of the FlashRecovery directory and associated files.
I really start to have heartburn and fire off an email to our Server IT people, who are of course out of the building at this time. This morning I get a reply stating that they think the MBR on that drive got corrupted, and so the drive is now handing the old MBR to the OS and really screwing things up. They're going to have to manually overwrite the MBR and slow format the drive. Thankfully this DB was not in production yet, so the loss of the log files isn't a huge problem, but what happens next is.
Since I can't start the DB in mount mode:
SQL> startup mount ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated ORA-01263: Name given for file destination directory is invalid OSD-04018: Unable to access the specified directory or device. O/S-Error: (OS 2) The system cannot find the file specified.I figure that I need to create a pfile from the spfile and change the db_recovery_file_dest parameter and use the pfile to start the DB instance, so:
SQL> create pfile='myinit.ora' from spfile; File created.I go and hunt down the pfile that was created, and open it up and think to myself: "self, this looks kind of odd, but...":
atsm.__db_cache_size=7918845952 atsm.__java_pool_size=33554432 atsm.__large_pool_size=67108864 atsm.__oracle_base='E:\app\I delete the *.db_recovery_file_dest='F:\FlashRecoveryArea' line and ,'F:\FlashRecoveryArea\ATSM\control02.ctl' from the *.control_files parameter since it also points to the missing path/file, save my file and then do:
'#ORACLE_BASE set from environment atsm.__pga_aggregate_target=5905580032 atsm.__sga_target=9563013120 atsm.__shared_io_pool_size=0 atsm.__shared_pool_size=1409286144 atsm.__streams_pool_size=33554432 *.audit_file_dest='E:\app\ \admin\ATSM\adump' *.audit_trail='db' *.compatible='188.8.131.52.0' *.control_files='E:\oracle\oradata\ATSM\ATSM\control01.ctl','F:\FlashRecoveryArea\ATSM\control02.ctl' *.db_block_size=8192 *.db_domain=' ' *.db_name='ATSM' *.db_recovery_file_dest='F:\FlashRecoveryArea' *.db_recovery_file_dest_size=5242880000 *.diagnostic_dest='E:\app\ ' *.dispatchers='(protocol=TCP)' *.memory_target=15457058816 *.open_cursors=300 *.processes=150 *.remote_login_passwordfile='EXCLUSIVE' *.shared_servers=1 *.undo_tablespace='UNDOTBS1'
SQL> startup pfile='myinit.ora'; LRM-00109: could not open parameter file 'myinit.ora' ORA-01078: failure in processing system parameters SQL>And get both LRM-00109 and ORA-01078. So I think maybe - just maybe - I screwed up the edits to the pfile - so I'll just try exporting it, and then using it - if there's nothing wrong with the export, then I should just get the error about being able to find the path, right? Wrong:
SQL> create pfile from spfile; File created.I check, and the default file name it used is INITatsm.ORA - in %ORACLE_HOME%\database, so:
SQL> startup pfile='INITatsm.ORA'; LRM-00109: could not open parameter file 'INITatsm.ORA' ORA-01078: failure in processing system parameters SQL>Well crap, that didn't work, so let's just be very specific:
SQL> startup pfile='E:\app\No dice.
\product\11.2.0\dbhome_1\database\INITatsm.ORA'; LRM-00109: could not open parameter file 'E:\app\ \product\11.2.0\dbhome_1\database\INITatsm.ORA' ORA-01078: failure in processing system parameters SQL>
So it appears as though Oracle is exporting a pfile from it's spfile that isn't valid.
And that's where I'm at. I did find what I think is the "default" pfile that is created when the database is installed, and I copied it and attempted to use it in the startup pfile= command, but I get the same exact Oracle errors.
Has anyone encountered this before? Do you have any suggestions? We really don't want to have to dump the entire install - which is probably a bit extreme - as the consultant who set it up is no longer with us and we cannot get the funding to hire in another one at this point.